|
|
 |
|
| cardsnmore.com / cardprinter / nisca_pr5100.html |
|
NISCA Card Printer PR5100 |
|
 NISCA Card Printer PR5100
NISCA, the premier name in PVC card printing technology, has engineered the PR5100; a versatile, full-featured, reliable and cost effective plastic card printer that sets new price/performance industry standards. With or without available options such as magnetic stripe encoding, security/ hologram overlays, and heavy-duty "patch" lamination, the PR5100 stands alone as the ideal solution to your identification card printing needs.
If an overlay is required, a parallel processing feature enables cards to be produced every minute and 18 seconds with the overlay. Parallel processing allows the printer to process a card while previous cards are being laminated in the heat roller. Both pieces of equipment are capable functioning simultaneously and independently!
Standard Dual Side Printing
The PR5100 and the PR5200 are the only ID card printers on the market that print on both sides of the card on one pass. This feature has been standardized to address the concerns of our customers who purchase the PR5100 or PR5200. In most cases, users require the ability to print pictures, names, addresses, barcodes, and a wide-range of variable data on both sides of a card. In addition, the ability to encode on a magnetic stripe or IC chip is also essential. For these reasons, Nisca has recognized the flexibility of dual-side printing as not an option but a necessity.
Dual Coercivity Encoder Module
The optional encoding unit was designed with the ability to encode both high and low coercivity magnetic stripes. The encoder installs within minutes in the lower level of the printer. The adjustment for the type of magnetic stripe is made through the LCD control panel, after which point, the rest of the process is automatic!!!
Optional Overlay Station
The optional heat roller, model number PR5101, is specifically designed to apply either a thick polyester (0.001" thick) overlay, or a holographic overlay (0.0001" thick). Each is available with or without added security features and is designed to increase card durability. Having recognized the drastic differences between these two types of materials, as well as the manner with which they affect cards, Nisca has specifically designed overlay stations for use with either of these materials. This is contrary to most other manufacturers who claim that their printer can produce cards with either material in a single unit. After extensive studies, Nisca's engineers have come to the conclusion that this is not the case. When purchasing a heat roller, the user should specify the type of overlay materials that they require and utilize equipment specifically designed to apply it.
The overlay station hooks directly to the printer and is connected via an attached RS532 cable for data relay. The printer automatically recognizes the heat roller as soon as it is attached and will employ any preset commands that have been provided. Adjustments can be made again through the use of the LCD control panel.
QUICK FACTS:Includes a Standard SCSI Interface
Automatic Dual-Side Printing
Two Frame Memory
Innovative Internal Self-Diagnostic
Snap In/Out Ribbon Cartridge
Self Aligning Printhead Module
Optional Internal Stripe Encoder
Print Technology
Dye diffusion, 16.7 million full colors, thermal printing technique
300 dot per inch print resolution
Infrared readable resin black print for text and bar codes
Printing time for one single-sided card is approximately 30 seconds
Easily replaceable snap in/out print head unit
JIS x 6301/CR-80 PVC card (dimensions of 54 mm x 85.5 mm average)
Card thickness: 0.76 mm (0.030") +/-10% thickness
Print head designed to reduce damage from defective card stock
Dual Side Printing
Two internal flip turn modules are standard
Switchable 2 frame memory to receive both sides of a card at once
Ribbons/Ribbon Cartridge
Easily replaceable ribbon cartridge
YMCKO,YMCK, and KO dye diffusion and resin black ribbons
Holographic overlay for high security (optional)
Thicker overlaminate (0.001") for durable protection (optional)
Communication Interface
SCSI standard interface for fast data transfer
Proprietary interface for optional unit and third party unit integration
Switchable TWO frame memory
Information feed back capability through the SCSI interface
LCD Panel
Print status information/Diagnostic information
Ribbon format setting
Two card counters - Resettable/Non-resettable
Optional Units/Modules
High/Low coercivity ISO compatible magnetic stripe encoder/verifier
Heat roller unit for security laminations
Physical Characteristics
Height: 378 mm (14.9 in.)
Width: 476 mm + 116 mm (output tray) (18.7 in. + 4.57 in.)
Depth: 350 mm (13.8 in.)
Weight: 23 kg (50 lb.)
Power Source
110/220V automatic switching @ 50/60Hz
Heat roller unit for security laminations
Environmental Data
Acoustic Noise: 60dB max.
Operational temperature: 10-35 deg C
Operational humidity: 35-80% RH non-condensing |
|
|
|
|
